U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-18
Assigning SNMP Parameters
Use the SNMP Configuration screen to display and modify
parameters for the Simple Network Management Protocol (SNMP).
The switch includes an on-board SNMP agent which monitors the
status of its hardware, as well as the traffic passing through its
ports. A computer attached to the network, called a Network
Management Station (NMS), can be used to access this
information. Access rights to the on-board agent are controlled by
community strings. To communicate with the switch, the NMS
must first submit a valid community string for authentication. The
options for configuring community strings and related trap
functions are described in the following sections.
SNMP Configuration
==================
Send Authentication Fail Traps : ENABLED
SNMP Communities ...
IP Trap Managers ...
<APPLY>
<OK>
<CANCEL>
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter
Description
Send Authentication Fail
Traps
Issue a trap message to specified IP trap managers
whenever authentication of an SNMP request fails.
(The default is disabled.)
SNMP Communities
Assigns SNMP access based on specified strings.
IP Trap Managers
Specifies management stations that will receive
authentication failure messages or other trap
messages from the switch.
Summary of Contents for TigerSwitch SMC6948L2
