W
EB
-B
ASED
M
ANAGEMENT
3-9
System Information
Use the System Information screen to display descriptive
information about the switch, or for quick system identification as
shown in the following figure and table.
Parameter
Description
System Name*
Name assigned to the switch system.
IP Address
IP address of the agent you are managing. The agent
supports SNMP over UDP/IP transport protocol. In
this environment, all systems on the Internet, such as
network interconnection devices and any PC
accessing the agent (or running EliteView) must have
an IP address. Valid IP addresses consist of four
numbers, of 0 to 255, separated by periods. Anything
outside of this format will not be accepted by the
configuration program.
Object ID
MIB II object identifier for switch’s network
management subsystem.
Location*
Specifies the area or location where the system
resides.
Contact*
Contact person for the system.
System Up Time
Length of time the current management agent has
been running.
*
Maximum string length is 255, but the screen only displays 45 characters.
You can use the arrow keys to browse the whole string.
Summary of Contents for TigerSwitch SMC6948L2
