Managing Your System Security
Page 17 | August 17, 2010
For the Arm Away mode, the Entry/Exit Delay, the following rules apply:
When armed, the system audibly beeps once per second announcing that the system is in the
Exit Delay period
. During the last 10 seconds of the Exit Delay state, the system audibly
fast beeps (two beeps per second).
When an entry/exit zone is opened, the Entry Delay period sounds an audible beep each
second. The system beeps twice per second in the last 10 seconds of the
Entry Delay
period
. The keypad code must be entered during this period to avoid sounding an alarm.
A numerical countdown timer on the TouchScreen indicates how much time remains in the
Exit Delay.
If an entry/exit zone is faulted, restored and then faulted again prior to the end of the exit
delay then the Exit Delay is restarted. This only occurs once.
If no Entry/Exit Zone opens and closes during the Exit Delay, the Arming Mode reverts to
Armed Stay
.
After Exit Delay, the Security Status header is relabeled
Armed Away
and sounds 2 short
beeps.
If an Entry/Exit zone is opened the Entry Delay period starts with an audible beep each
second. The system beeps twice per second in the last 10 seconds of the Entry Delay period.
The keypad code must be entered during this period to avoid sounding an alarm. During the
Entry Delay period, the motion detectors will not log events.