Managing Your System Security
Page 36 | August 17, 2010
When the security zones are ready for testing, “Ready to Arm” is displayed under the Arm button.
4.
Touch
Arm
.
Your security system is armed in the special Test mode. The Exit Delay is only 10 seconds long. Motion sensors are
turned off (not tripping alarms but recording events) until an Entry/Exit security zone is faulted.
The Arm button changes to a
System Armed
notice.
5.
Touch
Next
.
The Alarm Test screen is displayed.
6.
Open and close an Entry/Exit door.
The Entry Delay period starts (default 30 seconds). The TouchScreen begins beeping once per second. The beeping
speeds up to twice per second in the last 10 seconds of the Entry Delay period. The motion detectors are turned on.
Note:
To mute the siren, touch
Mute Siren
. This is not recommended. Ensuring that your siren
is in working order is an important part of the test.
After the end of the Entry Delay period ends, the siren sounds (unless you muted it) and the Entry/Exit zone you
faulted is marked with an alarm tag.
