![background image](http://html.mh-extra.com/html/smc-networks/rb5701-z/rb5701-z_user-manual_1300610084.webp)
Appendix D: Quick Reference Tables
Page 79 | August 17, 2010
Table 13: System & Security Settings Ranges & Defaults
Feature
Comments
Ranges & Defaults
Emergency Alarms (aka
manual alarms)
TouchScreen:
Press to access Emergency Alarm options
The functions of these buttons
cannot be changed.
Key Fob/Key Pad:
Press and hold for 1.5 seconds to send a Panic
alarm for police assistance
System
Acknowledgement
When armed, TouchScreen beeps 3 times. If armed by
key fob, key fob’s LED flashes red once and the holds
red for two seconds. When disarmed from the
TouchScreen, beeps once. If disarmed key fob, key
fob’s LED flash green once and then hold green for
two seconds.
This feature is not configurable.
Remote Arming
Using the key fob, system can be armed in Arm Away
mode and Arm Stay mode. Exit Delay period works
the same way as non-remote arming.
Arm Stay Mode
Arm Away Mode
The functions of these buttons
cannot be changed.
Remote Disarming
Using the key fob, the system can be disarmed from
outside the premises. There is no Entry Delay.
Disarm system
This feature is not configurable.
Alarm Transmission
Delay
(aka Abort Window)
Length of time after an alarm sounds for the customer
to enter a valid keypad code to prevent alarm from
being sent to central.
Default: 30 sec.
Range: Minimum is 15 sec. and
the maximum is 45 sec.
Disarming During the
Alarm Transmission
Delay
System disarmed by entering a valid keypad code in the
TouchScreen or a key pad. If invalid keypad code
entered, alarm restarts.
This feature is not configurable.
When alarms are
successfully aborted
(that is, disarmed during
the Alarm Transmission
Delay period)
If system is disarmed with within the Alarm
Transmission Delay period, no alarm transmission
occurs. Contacts can opt not to receive SMS and/or
email messages notifying them when an alarm was
aborted and that central monitoring was not notified.
By default, Verify contacts are
notified by SMS and email
when an alarm is disarmed
during the Alarm Transmission
Delay period. .
Cancel Window
For 5 minutes after the end of the Abort Window,
customer can disarm system to send an Alarm Cancel
to central monitoring.
This feature is not configurable.
Duress Code
A four digit code that sends silent alarm immediately.
Otherwise, same as Master keypad code.
Default: Duress Code is
disabled.