![background image](http://html.mh-extra.com/html/smc-networks/rb5701-z/rb5701-z_user-manual_1300610046.webp)
Managing Your System Security
Page 41 | August 17, 2010
Configuring a New or Reset Security Network Router to Work
within the Security Network
When the security network was originally installed, the Installer performed various procedures to
―activate‖ your network for use. One of those procedures was to configure your security network
router for use by the TouchScreen.
Use this procedure either of the following is true:
The security network router has been swapped with a new one.
The security network router is connected to the TouchScreen wirelessly and has been reset
to its original factory defaults by depressing the reset button for 15 seconds
This procedure resets the following attributes on the security network router for the TouchScreen to
use it:
Username and password
Service Set ID (SSID) for 802.11 (WPA 2) access