manualshive.com logo in svg

SMC Networks RB5701-Z, User Manual

Share
Download
SMC Networks RB5701-Z User Manual Download Page 2

  

 

Page ii | August 17, 2010 

 

© 2006, 2007, 2008, 2009, 2010 uControl, Inc. The uControl logo, uControl, Inc., and all other uControl products and technology names are trademarks or 
registered trademarks of uControl, Inc. All other products or services mentioned herein are trademarks of their respective companies. 

Compliances 

FCC Notice 

This device has been designed, constructed, and tested with for compliance with FCC Rules that regulate 

intentional and unintentional radiators. As the user of this device, you are not permitted to make any 
alterations or modifications to this equipment or to use it in any way that is inconsistent with the 
information described in this quick-start guide, without the express written permission of SMC 
Networks. Doing so will void your warranty to operate this equipment. 

This device complies with Part 15 of the FCC rules. Operation of this device is subject to the following 
two conditions:  

1.

 

This device may not cause harmful interference, and  

2.

 

This device must accept any interference received, including interference that may cause undesired 
operation. 

The ―IC‖ designation preceding the radio certification number indicates that this device complies with 
the Industry of Canada specifications. 

 

Device Purpose 

Fire/Alarm Central Panel

 

UL1023 Notice 

This device complies with UL1023. 

Summary of Contents for RB5701-Z























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands