Maintaining and Configuring the TouchScreen Device
Page 57 | August 17, 2010
Configuring the Screensaver
You can configure the TouchScreen to display a screen saver after the device has been inactive for
some period of minutes.
To configure the TouchScreen screensaver:
From the Settings menu (see
Configuring the TouchScreen
on page 5), touch
TouchScreen
Screensaver Configuration
.
The Screensaver Configuration screen is displayed.
From this screen you can choose (among others) to have your screensaver display:
A slideshow of photos from your Photo widget
Information from your Weather widget
News headlines from your News widget
Configuring the Tones and Volume Levels
To set the tones that the TouchScreen uses when zone events occur:
From the Settings menu (see
Configuring the TouchScreen
on page 5), touch
TouchScreen
Sound Configuration
.
The Sounds Configuration screen displayed.
From this screen you can change the tones the TouchScreen plays when an Entry/Exit door is
opened and closed. You can also change the tones played when someone walks in front of a motion
detector.
To set the tones that the TouchScreen uses when zone events occur:
From the Sounds Configuration screen, touch the
Volume
tab.
The Volume screen is displayed.
From this screen you cause the TouchScreen tones to be louder or quieter.