Appendix D: Quick Reference Tables
Page 78 | August 17, 2010
Appendix D: Quick Reference Tables
This section provides tables that list the ranges and default settings for features in your security
system. The tables are grouped in the following categories:
System & Security settings
TouchScreen device settings (81)
Advanced system settings (81)
Table 13: System & Security Settings Ranges & Defaults
Feature
Comments
Ranges & Defaults
Exit Delay
The time allotted for the customer to exit the premises
when the security system is armed;
The Exit Delay for Arm Stay and Arm Night modes is
twice the configured Exit Delay up to120 seconds.
Default: 60 seconds
Range: 30 seconds to 99
seconds
Exit Delay Progress
Annunciation
TouchScreen beeps once per second. Twice/second
during the last 10 seconds.
Disabled for Arm Stay & Arm
Away.
This feature is not configurable.
Exit Delay Restart
Entry/Exit zone is faulted, restored and then faulted
again prior to the end of the exit delay, then Exit Delay
restarts.
One time only.
This feature is not configurable.
Exit Error
If an Entry/Exit door is left open at the end of Exit
Delay, the Entry Delay starts and, if the system is not
disarmed, an alarm sounds.
This feature is not configurable.
Unvacated Premises
During Arm Away, if no Entry/Exit Zone opens and
closes during the Exit Delay, the Arming Mode reverts
to Armed Stay.
This feature is not configurable.
Entry Delay
The time allotted for the customer to disarm the
system after tripping an Entry/Exit security zone.
Default: 30 seconds
Range: 30 to 99 seconds
Entry Delay Progress
Annunciation
TouchScreen beeps once per second Twice/second
during the last 10 seconds.
This feature is not configurable.
Disarm
Enter a keypad code to disarm the system.
This feature is not configurable.
Control Buttons
Home button
The functions of these buttons
cannot be changed.
Quickarm button
Emergency Alarm button
