SMC Networks LES D Series, Operation Manual, Page: 7 / 58

- 6 -
4. TEST Drive / Step No.0 → No.1 → No.0
・・・
a. Driving preparation: Servo On → Return to ORIG / Refer to “3.JOG Drive”.
b.TEST Drive
“Step No.0” Operation
→ Operation
“Step No.1” Operation
→ Operation
c.Driving stop : Servo Off / Refer to “3.JOG Drive”.
5. Step data change
Ex) “Step No.0” / Positioning operation / At the time of shipment, Step No.0 is set to positioning operation
Input ”20”
6. Controller setting software screen explanation
Refer to the “Help / Easy mode” menu in the “ACT Controller” setting software.
Procedure 1:
Select “Step No.0”
You can select anywhere in
the row
Procedure 2:
Select “Drive”
Procedure 3:
Select “Step No.1”
You can select anywhere in
the row
Procedure 4:
Select “Drive”
For details of operation, and relationship between operation procedure and input/
output signals, refer to“3.3 Step Data” setting method p. 20 to 30.
Change of positioning stop
position
Position: 50mm
→ 20mm