SMC Networks 8606SX - annexe 1 Management Manual Download Page 64

Page: 64 / 152

SIN G

T HE

YST EM

ONFIGURATION

ROGRAM

2-50

802.1Q VLAN Port Configuration

Use this screen to configure port-specific settings for IEEE 802.1Q
VLAN features.

Note:

This  switch does  not support GVRP. Therefore, the GVRP
Status parameter is  set to disabled and cannot be enabled.
The other  GVRP parameters will always display zeros.

Tiger Switc h 100 0 SMC8 608SX

802.1Q VLAN Port Configuration : Port 1 - 8

Port

PVID

Acceptable

Ingress

GVRP

GVRP Failed

GVRP Last

Frame Type

Filtering

Status

Registrations

PDU Origin

---------------------------------------------------------------------

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

All

FALSE

DISABLED

00-00-00-00-00-00

<APPLY>

<OK>

Use <TAB> or arrow keys to move, other keys to make changes.

Parameter

Description

PVID

The VLAN ID assigned to untagged frames
received on this port. Use the PVID to assign
ports to the same untagged VLAN.

Acceptable Frame Type This switch accepts “All” frame types, including

VLAN tagged or VLAN untagged frames. Note
that all VLAN untagged frames received on this
port are assigned to th e PVID for this port.

Ingress Filtering

If set to “True,” inc oming frames for VLANs which
do not include this port in their member set will
be discarded at the inbo und port.

Summary of Contents for 8606SX - annexe 1

























































































































































Search results

Summary of Contents for 8606SX - annexe 1

Reviews:

Related manuals for 8606SX - annexe 1

Brands by name

Popular brands

SMC Networks 8606SX - annexe 1, Management Manual

Search results

Summary of Contents for 8606SX - annexe 1

Reviews:

Related manuals for 8606SX - annexe 1

Brands by name

Popular brands