![background image](http://html.mh-extra.com/html/smc-networks/8606sx-annexe-1/8606sx-annexe-1_management-manual_1300698046.webp)
U
SIN G
T HE
S
YST EM
C
ONFIGURATION
P
ROGRAM
2-32
Note:
The Fast STA Mode enables end-node workstations and
servers to overcome time-out problems when the Spanning
Tree Algorithm is implemented in a network. Therefore, the
Fast STA Mode should only be enabled for ports that are
connected to an end-node device.
Viewing the Current Spanning Tree Information
The Spanning Tree Information screen displays a summary of the
STA information for the overall bridge or for a specific port. To
make any changes to the parameters for the Spanning Tree, use
the Spanning Tree Configuration menu.
Fast STA
Mode
DISABLED This parameter is used to enable/disabled the
Fast Spanning Tree mode for the port. In this
mode, ports skip the Blocked, Listening and
Lear ning states and proceed straight to
Forward ing.
Tige rSwit ch 10 00 SM C8608S X
Spann ing T ree I nform ation : Sel ectio n Men u
ST A Bri dge I nform ation
...
ST A Por t Inf ormat ion . ..
<OK >
Use < TAB> or ar row k eys t o mov e. <En ter> to se lect.
Parameter
Default
Descr iption
Summary of Contents for 8606SX - annexe 1
