SMC Networks 8606SX - annexe 1, Management Manual

Page: 41 / 152

U
SING THE
S
YSTE M
C
ONFIGURATION
P
ROGRAM
2-27
Viewing the Current Port Configuration
The Port Information screen displays the port type, status, link
state, and flow control in use, as well as the communication speed
and duplex mode. To change any of the port settings, use the Port
Configuration menu.
Ti gerSw itch 1000 SMC860 8SX
Port Info rmati on : Port 1 - 8
Po rt Ty pe O perat ional Link Fl owCont rol Speed and
In Use Duple x InU se
-- ------ ----- ----- ----- ----- ----- ------ ----- ----- ----- ----- --
1 . 100 0SX YES DOWN 80 2.3x 1000- FULL
2 . 100 0SX YES DOWN NO NE 1000- FULL
3 . 100 0SX YES UP 80 2.3x 1000- FULL
4 . 100 0SX YES DOWN NO NE 1000- FULL
5 . 100 0SX YES DOWN 80 2.3x 1000- FULL
6 . 100 0SX YES UP NO NE 1000- FULL
7 . 100 0SX YES DOWN NO NE 1000- FULL
8 . 100 0SX YES UP 80 2.3x 1000- FULL
<O K>
U se <TA B> or arro ws ke ys to move . <Spa ce> t o scr oll o ption s.
Parameter Description
Type Shows port type as 1000SX: 1000BASE-SX
Oper ational Shows if the por t is fun ctio ning o r no t.
Link Indicates if the port has a valid con nection to an
external device.
FlowControl InUse Shows the flow control type in use. IEEE 802.3x
is used for the Gigabit ports, which are fixed at
1Gbps, full duplex. Flow control can eliminate
frame loss by “blocking” traffic from end stations
connected directly to the switc h.
Speed an d DuplexInUse Displays th e current port speed and duplex
mode used .