W
EB
-B
ASED
M
A NAGE MEN T
3-25
STA Port Configuration
The following figure and table describe STA configuration for ports
or modules.
Max
(Message)
Age
20
The maximum time (in secon ds) a devic e can wait
without receiving a c onfiguration message before
attempting to reconfigur e. All device ports (except
for designated ports) should r eceive configuration
messages at regular intervals. Any port that ages out
STA information (provided in the last configuration
message) becomes the designated port for the
attached LAN. If it is a root port, a new root port is
selected from among the device ports attached to
the network.
The minimum value is the higher of
6 or [2 x (Hello Time + 1)].
The maximum value is the lower of
40 or [2 x (Forward Delay - 1)].
For ward
Delay
15
The maximum time (in seconds) the root device
will wait before changing states (i.e., listening to
learning to forwarding). This delay is required
bec ause every device must receive information
about topology changes before it starts to forward
frames. In addition, each port needs time to listen
for conflicting information that would make it
return to a blocking state; otherwise, temporary
data loops migh t result.
Maximum value is 30.
Min imum value is the higher of 4 or [(Max. Message
Age / 2) + 1].
Parameter
Default Des cription
Summary of Contents for 8606SX - annexe 1
