SMC Networks 8606SX - annexe 1 Management Manual Download Page 62

Page: 62 / 152

SIN G

T HE

YST EM

ONFIGURATION

ROGRAM

2-48

802.1Q VLAN Static Table Configuration

Use this screen to create a new VLAN or modify the settings for an
existing VLAN. Note that all ports can only belong to one untagged
VLAN. This is set to VLAN 1 by default, but can be changed via the
802.1Q VLAN Port Configuration screen.

Ti gerSw itch 1000 SMC860 8SX

802 .1Q V LAN S tatic Tabl e Conf igura tion

V ID

VLAN Name

Stat us

- ----- ----- ----- ----- ------ ----- --

Ingr ess P orts

For bidden Egre ss Po rts

VID : 0
[Sho w]
[Mor e]
[New ]

< OK>

Us e <TAB > or arrow keys to m ove, other keys to ma ke ch anges .

Parameter

Description

VID

The ID for the VLAN currently displayed.

Range: 1-2048

VLAN Name

A user-specified symb olic name for this VLAN.

String length: Up to 8 alphanumeric char acters

Status

Sets the current editing status for this VLAN as:
Not in Service, Destroy, or Ac tive.

Egr ess Ports

Set the entry for any port in this field to “1” to ad d
it to the displayed VLAN, or “0” to remove it from
the VLAN.

For bidden Egress Ports Prevents a port from being automatically added

to this VLAN via GVRP. Note that GVRP is not
supported by this switc h.

[Show]

Displays settings for the specified VLAN.

[More]

Displays consecutively numbered VLANs.

[New]

Sets up the screen for con figuring a new VLAN.

Summary of Contents for 8606SX - annexe 1

























































































































































Search results

Summary of Contents for 8606SX - annexe 1

Reviews:

Related manuals for 8606SX - annexe 1

Brands by name

Popular brands

SMC Networks 8606SX - annexe 1, Management Manual

Search results

Summary of Contents for 8606SX - annexe 1

Reviews:

Related manuals for 8606SX - annexe 1

Brands by name

Popular brands