![background image](http://html.mh-extra.com/html/smc-networks/8606sx-annexe-1/8606sx-annexe-1_management-manual_1300698025.webp)
U
SING
THE
S
YSTE M
C
ONFIGURATION
P
ROGRAM
2-11
IP Configuration
Use the IP Configuration screen to set the bootup option, or
configure the switch’s IP parameters. The screen shown below is
described in the following table.
MAX Number o f Allowed
Telnet Sessions
The maximum number of Telnet sessions
allowed to simultaneously access the
on-board management agent.
MAC Address
Physic al addr ess of the on-board agent.
Tiger Switc h 100 0 SMC 8608SX
Netw ork C onfig urati on: I P Conf igura tion
Inte rface Type : Et herne t
IP A ddres s
: 10 .1.11 3.29
Subn et Ma sk
: 25 5.255 .0.0
Gate way I P
: 10 .1.0. 254
IP S tate
: US ER-CO NFIG
<AP PLY>
< OK>
<CA NCEL>
Use <TAB> or a rrow keys to mo ve, o ther k eys t o mak e cha nges.
Parameter
Des cription
Interface Type
Indicates IP over Ethernet.
IP Address*
IP address of the switch you are managin g. The switch
supports SNMP over UDP/IP transport protocol. In
this environment, all systems on the Internet, su ch as
network interconnection devices and any PC
acc essing the on-board management agent (or
running EliteView) must have an IP address.
Valid IP addresses c onsist of four numbers, of 0 to
255, and separated by periods. Anything outside of
this format will not be accepted by the configuration
program.
Subnet Mask*
Subnet mask of the switch you have selected. This
mask identifies the host address bits used for routing
to specific subnets.
Parameter
Des cription
Summary of Contents for 8606SX - annexe 1
