System Configuration
5-18
remove an entry from the table, use the
address filter delete
command. To display the current settings, use the
show
authentication
command from the Exec mode.
CLI Commands for RADIUS MAC Authentication – Use the
mac-authentication server
command from the global
configuration mode to enable remote MAC authentication. Set the
timeout value for re-authentication using the
mac-authentication
session-timeout
command. Be sure to also configure
SMC-AP(config)#mac-authentication server local
6-57
SMC-AP(config)#address filter default denied
6-54
SMC-AP(config)#address filter entry 00-70-50-cc-99-1a denied
6-55
SMC-AP(config)#address filter entry 00-70-50-cc-99-1b allowed
SMC-AP(config)#address filter entry 00-70-50-cc-99-1c allowed
SMC-AP(config)#address filter delete 00-70-50-cc-99-1c
6-56
SMC-AP(config)#exit
SMC-AP#show authentication
6-59
Authentication Information
=========================================================
MAC Authentication Server : LOCAL
MAC Auth Session Timeout Value : 300 secs
802.1x : DISABLED
Broadcast Key Refresh Rate : 5 min
Session Key Refresh Rate : 5 min
802.1x Session Timeout Value : 300 secs
Address Filtering : DENIED
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address Status
----------------- ----------
00-70-50-cc-99-1a DENIED
00-70-50-cc-99-1b ALLOWED
=========================================================
SMC-AP#
Summary of Contents for 2555W-AG
