SMC Networks 2555W-AG, User Manual

Page: 197 / 260

Interface Commands
6-69
Default Setting
None
Command Mode
Global Configuration
Command Usage
The primary and secondary name servers are queried in
sequence.
Example
This example specifies two domain-name servers.
Related Commands
show interface ethernet (page 6-72)
ip address
This command sets the IP address for the (10/100Base-TX)
Ethernet interface. Use the
no form to restore the default IP
address.
Syntax
ip address < ip-address > < netmask > < gateway >
no ip address
• ip-address - IP address
• netmask - Network mask for the associated IP subnet. This
mask identifies the host address bits used for routing to
specific subnets.
• gateway - IP address of the default gateway
SMC-AP(if-ethernet)#dns primary-server 192.168.1.55
SMC-AP(if-ethernet)#dns secondary-server 10.1.0.55
SMC-AP(if-ethernet)#