![background image](http://html1.mh-extra.com/html/smc-networks/2555w-ag/2555w-ag_user-manual_1301116214.webp)
Command Line Interface
6-86
Command Usage
• To enable Wired Equivalent Privacy (WEP), use the
authentication
command to select the “shared key”
authentication type, use the
encryption
command to
specify the key length, and use the
key
command to
configure at least one key.
• If WEP is enabled, all wireless clients must be configured
with the same shared keys to communicate with the access
point.
• The encryption length specified in the
encryption
command and the
key
command must match.
• The encryption index, length and type configured in the
access point must match those configured in the clients.
Example
Related Commands
authentication (page 6-83)
encryption (page 6-84)
transmit-key
This command sets the index of the key to be used for encrypting
data frames broadcast or multicast from the access point to
wireless clients.
Syntax
transmit-key
<
index>
index
- Key index. (Range: 1-4)
Default Setting
1
SMC-AP(if-wireless g)#key 1 64 hex 1234512345
SMC-AP(if-wireless g)#key 2 64 ascii asdei
SMC-AP(if-wireless g)#key 3 128 hex
12345123451234512345123456
SMC-AP(if-wireless g)#
Summary of Contents for 2555W-AG
