![background image](http://html1.mh-extra.com/html/smc-networks/2555w-ag/2555w-ag_user-manual_1301116092.webp)
System Configuration
5-34
CLI Commands for Downloading Software from a TFTP Server –
Use the
copy tftp file
command from the Exec mode and then
specify the file type, name, and IP address of the TFTP server.
When the download is complete, the
dir
command can be used
to check that the new file is present in the access point file
system. To run the new software, use the
reset board
command
to reboot the access point.
SMC-AP#copy tftp file
6-42
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>: [1]:1
TFTP Source file name:smc-img.bin
TFTP Server IP:192.168.1.19
SMC-AP#dir
6-44
File Name Type File Size
-------------------------- ---- -----------
dflt-img.bin 2 1319939
smc-img.bin 2 1629577
syscfg 5 17776
syscfg_bak 5 17776
262144 byte(s) available
SMC-AP#reset board
6-14
Reboot system now? <y/n>: y
Summary of Contents for 2555W-AG
