![background image](http://html1.mh-extra.com/html/smc-networks/2555w-ag/2555w-ag_user-manual_1301116170.webp)
Command Line Interface
6-42
copy
This command copies a boot file, code image, or configuration file
between the access point’s flash memory and a FTP/TFTP
server. When you save the configuration settings to a file on a
FTP/TFTP server, that file can later be downloaded to the access
point to restore system operation. The success of the file transfer
depends on the accessibility of the FTP/TFTP server and the
quality of the network connection.
Syntax
copy
<
ftp
|
tftp
>
file
copy config
<
ftp
|
tftp
>
•
ftp
- Keyword that allows you to copy to/from an FTP server.
•
tftp
- Keyword that allows you to copy to/from a TFTP
server.
•
file
- Keyword that allows you to copy to/from a flash
memory file.
•
config
- Keyword that allows you to upload the configuration
file from flash memory.
Default Setting
None
Command Mode
Exec
Command Usage
• The system prompts for data required to complete the copy
command.
• Only a configuration file can be uploaded to an FTP/TFTP
server, but every type of file can be downloaded to the
access point.
• The destination file name should not contain slashes (\ or /),
the leading letter of the file name should not be a period (.),
and the maximum length for file names on the FTP/TFTP
Summary of Contents for 2555W-AG
