System Configuration
5-56
Note:
The index and length values used in the
key
command must be
the same values used in the
encryption
and
transmit-key
commands.
CLI Commands for WEP over 802.1x Security – From the
802.11a or 802.11g interface configuration mode, use the
authentication
command to select open system authentication.
Use the
multicast-cipher
command to select WEP cipher type.
Then set 802.1x to required with
802.1x
command, and disable
MAC authentication with the
mac-authentication
command. To
view the current 802.11g security settings, use the
show
interface wireless g
command (not shown in example).
----------------Security----------------------------------
Closed System : DISABLED
Multicast cipher : WEP
WPA clients : SUPPORTED
WPA Key Mgmt Mode : PRE SHARED KEY
WPA PSK Key Type : HEX
Encryption : 128-BIT ENCRYPTION
Default Transmit Key : 1
Static Keys :
Key 1: ***** Key 2: EMPTY Key 3: EMPTY Key 4: EMPTY
Authentication Type : SHARED
==========================================================
SMC-AP#
SMC-AP(config)#interface wireless g
6-68
Enter Wireless configuration commands, one per line.
SMC-AP(if-wireless g)#authentication open
6-83
SMC-AP(if-wireless g)#encryption 128
6-84
SMC-AP(if-wireless g)#multicast-cipher wep
6-89
SMC-AP(if-wireless g)#end
SMC-AP(config)#802.1x required
6-51
SMC-AP(config)#no mac-authentication
6-57
SMC-AP(config)#
Summary of Contents for 2555W-AG
