![background image](http://html1.mh-extra.com/html/smc-networks/2555w-ag/2555w-ag_user-manual_1301116083.webp)
Advanced Configuration
5-25
CLI Commands for Bridge Filtering
– Use the
filter local-bridge
command from the global configuration mode to prevent
wireless-to-wireless communications through the access point.
Use the
filter ap-manage
command to restrict management
access from wireless clients. To configure Ethernet protocol
filtering, use the
filter ethernet-type enable
command to enable
filtering and the
filter ethernet-type protocol
command to define
the protocols that you want to filter. To remove an entry from the
table, use the
address filter delete
command. To display the
current settings, use the
show filters
command from the Exec
mode.
SMC-AP(config)#filter local-bridge
6-60
SMC-AP(config)#filter ap-manage
6-61
SMC-AP(config)#filter ethernet-type enable
6-62
SMC-AP(config)#filter ethernet-type protocol ARP
6-63
SMC-AP(config)#exit
SMC-AP#show filters
6-64
Protocol Filter Information
=========================================================
Local Bridge :ENABLED
AP Management :ENABLED
Ethernet Type Filter :ENABLED
Enabled Protocol Filters
---------------------------------------------------------
Protocol: ARP ISO: 0x0806
=========================================================
SMC-AP#
Summary of Contents for 2555W-AG
