Smartgen HSC960, User Manual

Page: 19 / 37

HSC960 Genset Controller User Manual
HSC960 Genset Controller Version:1.0 2015-05-21 Page 19 of 37
No. Function
Cable
Size
Remarks
33 Aux. Sensor 1.0 mm
2
Connected to level
resistance sensor.
34 Digit Input1 1.0 mm
2
Ground connected is
active (B-)
Details see form 10
35 Digit Input2 1.0 mm
2
Ground connected is
active (B-)
36 Digit Input3 1.0 mm
2
Ground connected is
active (B-)
37 Digit Input4 1.0 mm
2
Ground connected is
active (B-)
38 Digit Input5 1.0 mm
2
Ground connected is
active (B-)
39 Sensor COM 1.0 mm
2
Digital input port and sensor common terminal.
40 RS485 COM /
Impedance-
120Ω shielding wire is
recommended, its single-end earthed.
41 RS485- 0.5 mm
2
42 RS485+ 0.5 mm
2
43 CT (A) 1.5 mm
2
External connected to CT secondary coil. (Rated
5A)
44 CT (B) 1.5 mm
2
External connected to CT secondary coil. (Rated
5A)
45 CT (C) 1.5 mm
2
External connected to CT secondary coil. (Rated
5A)
46 CT COM 1.5 mm
2
Details see installation instructions.
NOTE: LINK interface is parameters configured interface that can be programmed by PC using an SG72
adapter.