HSC960 Genset Controller User Manual
HSC960 Genset Controller Version:1.0 2015-05-21 Page 10 of 37
4
OPERATION
4.1
KEY FUNCTIONS
Table 4- Button Description
Icon
Definition
Description
Stop/ Reset
Stop running generator in Auto/Manual mode; Reset alarm if alarm
occurs; During stopping process, press this button again to stop
generator immediately.
Start
Start genset in Manual/Test mode.
Manual Mode
Pressing this key will set the module into Manual mode.
Auto Mode
Pressing this key will set the module into AUTO mode.
Lamp Test
Pressing this key will test the lamp if it is working.
Close
In manual mode, it can be controlled to close.
Open
In manual mode, it can be controlled to open.
Set/Confirm
In parameter setting interface, press this key will shift cursor or
confirm setting value.
Up/Increase
Scrolls the screen up; Shift the cursor up or increase the set value in
parameter setting menu.
Down/Decrease
Scrolls the screen down; Shift the cursor down or decrease the set
value in parameter setting menu.
Menu
Pressing this key will enter into menu interface; pressing this button
again will return to main interface.
