HSC960 Genset Controller User Manual
HSC960 Genset Controller Version:1.0 2015-05-21 Page 9 of 37
3
SPECIFICATION
Table 3- Parameters
Items
Contents
Operating Voltage
DC8.0V to DC35.0V, Continuous Power Supply.
Power Consumption
Standby: ≤2W
Working: <8W (When driving stepper motor is regulating)
Alternator Input Range
3-Phase 4-Wire
2-Phase 3-Wire
Single-Phase 2-Wire
3-Phase 3-Wire
AC15V - AC360V (ph-N)
AC15V - AC360V (ph-N)
AC15V - AC360V (ph-N)
AC30V - AC620V (ph-ph)
Alternator Frequency
50Hz/60Hz
Speed Sensor Voltage
1.0V to 24.0V (RMS)
Speed Sensor Frequency
10,000 Hz (max.)
Start Relay Output
16A DC28V supply output
Fuel Relay Output
16A DC28V supply output
Auxiliary Relay Output (1)
7A DC28V supply output
Auxiliary Relay Output (2)
7A DC250V supply output
Auxiliary Relay Output (3)
7A DC250V supply output
Auxiliary Relay Output (4)
7A DC250V supply output
Steady-state Speed Governing Rate
<1.5%
Steady-state Speed Fluctuation Rate
<0.5%
Transient Speed Governing Rate
Sudden Load-on <+10%
Sudden Load-off >-15%
Recovery Time
<5s
Driving Motor
DC Motor
; Drive current ≤6A
Case Dimension
197mm x 152mm x 47mm
Panel Cutout
186mm x 141mm
Common Reactance Secondary Current Rated: 5A
Working Conditions
Temperature: (-25~+70)°C; Humidity: (20~93)%RH
Storage Condition
Temperature:(-25~+70)°C
Protection Level
IP55 Gasket
Insulating Intensity
Apply AC2.2kV voltage between high voltage terminal
and low voltage terminal;
The leakage current is not more than 3mA within 1min.
Net Weight
0.56kg
