HSC960 Genset Controller User Manual
HSC960 Genset Controller Version:1.0 2015-05-21 Page 13 of 37
4.3.4
Manual start/stop operation
a) MANUAL START: Manual mode is selected by pressing the
button; a LED besides the
button will illuminate to confirm the operation; then press
button to start the genset; can
detect crank disconnect condition and generator accelerates to high-speed running automatically.
With high temperature, low oil pressure, over speed and abnormal voltage during generator
running, controller can protect genset to stop quickly. (please refer to No.3~8 of Automatic Start
Sequence for detail procedures.) Pressing
button the genset will be on load after the
genset is normal running.
b) MANUAL STOP: Press
can stop the running generators. (please refer to No.2~6 of
Automatic Stop Sequence for detail procedures).
