SMART Board Board 600i6, Configuration And User'S Manual

Page: 70 / 117

A P P E N D I X A
Remotely managing your system through a network interface
57
Submenu setting Description
Mute Turns the mute settings on or off. Select On to mute the
projector’s sound and Off to turn off mute.
Volume Control Enables volume control on the on-screen display. Select On to
enable projector volume adjustment and select Off to disable
projector volume adjustment.
Closed Captioning Turns the closed captioning feature on or off.
Language Sets the closed captioning language to CC1 or CC2 .
Typically, CC1 displays US English subtitles, whilst CC2
displays other regional languages, such as French or Spanish,
depending on television channel or media setup.
Display Mode Adjusts the display output to SMART Presentation , Bright
Room , Dark Room , sRGB and User modes so that you can
project images from various sources with consistent colour
performance:
l
SMART Presentation is recommended for colour fidelity.
l
Bright Room and Dark Room are recommended for
locations with those conditions.
l
sRGB provides standardised accurate colour.
l
User enables you to apply your own settings.
Brightness Adjusts projector brightness from 0 to 100.
Contrast Adjusts the difference between the lightest and darkest parts
of the image from 0 to 100.
Frequency Adjusts the display data frequency of the projected image from
-5 to 5 to match the frequency of your computer’s graphics card.
Tracking Synchronises your projector’s display timing with your computer’s
graphics card from 0 to 31.
Sharpness Adjusts the projected image’s sharpness from 0 to 31.
White Peaking Adjusts the image colour brightness from 0 to 10 whilst providing
more vibrant white shades. A value closer to 0 creates a natural
image and a value closer to 10 enhances brightness.
Degamma Adjusts the colour performance of the display from 0 to 3.
Colour Adjusts the Red, Green, Blue, Cyan, Magenta and Yellow colours
on the projector from 0 to 100 to provide custom colour and
luminance output. Each colour has a default value of 100.
Adjustments to the colour settings register to the User mode.
Auto Signal Detect Enables or disables signal searching of input connectors.
l
Select On to have the projector continuously switch inputs
until it finds an active video source.
l
Select Off to maintain signal detection in one input.
Lamp Reminder Select On to show or Off to hide the lamp replacement reminder
when it appears. This reminder appears 100 hours before the
recommended lamp replacement.