SMART Board Board 600i6, Configuration And User'S Manual

Page: 100 / 117

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
87
Field Possible Values Description
current highspeedfan
l
high
l
normal
The ranges must match the OSD ranges
current statereporting
l
on
l
off
Current state reporting value
target statereporting
l
= on
l
= off
State reporting value desired.
current poweroverride
l
on
l
off
Power override forces the projector to remain
in the ON state when the command is
received. This command is NOT persistent
and does not get stored to non-volatile memory
(cleared on power cycle).
When this mode is enabled, the power button
on the remote and the ECP must not turn off
the projector.
This command must also be added to the
service menu so the user can disable it via the
OSD.
target poweroverride
l
= on
l
= off
Value to set the power override to.