SMART Board Board 600i6, Configuration And User'S Manual

Page: 36 / 117

C H A P T E R 3
Using your interactive whiteboard system
23
Using your interactive whiteboard
Refer to the SMART Board 600 and D600 series interactive whiteboard installation and user’s
guide ( smarttech.com/kb/001414 ) for more information on using your interactive whiteboard.
When you connect your SMART Board interactive whiteboard to a computer with SMART
software, you can access the full capabilities of your interactive whiteboard.
For more information on this software, press the Help button on your interactive whiteboard pen
tray.
For additional resources, go to smarttech.com , click the flag icon to the right of the SMART logo
and then select your country and language. In the Support section of this website, you’ll find up-
to-date, product-specific information, including setup instructions and specifications.
The SMART training website ( smarttech.com/training ) includes an extensive library of training
resources that you can refer to when first learning to set up or use your interactive whiteboard
system.
Using the Extended Control Panel (ECP)
The ECP gives you control of the basic operations of your interactive whiteboard system.
Additionally, you can connect peripheral devices directly to the ECP, as described in Connecting
peripheral sources and outputs on page 33. Press the Power button on the ECP or remote
control to put the projector system into Standby mode or turn it on. Press the Input button on the
ECP or remote control to switch sources on the projector.
I M P O R T A N T
l
Keep your remote control in a safe place because there is no other way to access menu
options.
l
Do not disconnect cables from the ECP to connect peripheral devices because you could
disconnect controls for your interactive whiteboard.