Ski-Doo MX Zx 600 RS, Operator'S Manual

Page: 86 / 123

MAINTENANCE PROCEDURES
NOTE: Note position of bulb locking
pins on its base, and socket alignment
key.
mmr2008-039-008_a
1. Bulb locking pins
2. Bulb holder alignment key
Body
Hood
WARNING
Never operate engine with hood
removed from vehicle.
To open hood, release hood retaining
pins then slide hood towards the front
of the vehicle.
mmo2008-003-015_a
Step 1: Release retaining pins
Step 2: Slide hood towards the front
Side Panels
WARNING
Never operate engine with side
panels opened or removed from
vehicle.
To open a side panel, stretch and un-
hook the latches.
mmo2008-003-075_a
TYPICAL
1. Latches
To remove a side panel, open it then lift
it up. Free the lower hinge from its slot,
then free the upper hinge by lowering
the panel.
Vehicle Cleaning and Protection
Remove any dirt or rust.
To clean the entire vehicle, use only
flannel cloths or equivalent.
NOTICE
It is necessary to use flan-
nel cloths or equivalent on wind-
shield and hood to avoid damaging
further surfaces to clean.
To remove grease, oil and grime, use
BRP HEAVY DUTY CLEANER (P/N 293
110 001).
NOTICE
Do not use Heavy duty
cleaner on decals or vinyl.
To remove stubborn dirt from all plastic
and vinyl surfaces, use BRP PLASTIC
& VINYL CLEANER (P/N 413 711 200).
To remove scratches on windshield or
hood use the SCRATCH REMOVER
KIT (P/N 861 774 800).
NOTICE
Never clean plastic parts
or hood with strong detergent, de-
greasing agent, paint thinner, ace-
tone, products containing chlorine,
etc.
84
______________