Ski-Doo MX Zx 600 RS, Operator'S Manual

Page: 35 / 123

CONTROLS, INSTRUMENTS AND EQUIPMENT
NOTE: In very cold temperature, it is
recommended to rotate primer button
3 - 4 turns prior to pull it. This will elimi-
nate the possibility of sticking.
8) Rewind Starter Handle
Auto-rewind type located on right hand
side of snowmobile. To engage mech-
anism, pull handle slowly until a re-
sistance is felt then pull vigorously.
Slowly release handle.
9) Pre-Heat Switch
Racing Application Only
NOTE: This switch must be removed
on vehicles modified for warranty vali-
dation.
1
A33E0SA
2
1. Button depressed: Pre-heat timing curve
2. Button released: Normal timing curve
After starting the engine, push and
hold the pre-heat switch button in or-
der to pre-heat the tuned pipe.
Release pre-heat switch button once
the tuned is pre-heated.
10) High Beam/Low Beam
Switch
Allows selection of headlamp high
beam or low beam.
1
2
mmo2006-007-002_a
1. Low beam
2. High beam
11) Heated Grips/Heated
Throttle Lever Switch
Select the desired position to keep
your hands and thumb at a comfort-
able temperature.
1
2
3
A25H05A
1. Hot
2. Warm
3. Off
12) Gauge
WARNING
Never adjust or set functions on
the multifunction gauge while rid-
ing the vehicle.
NOTE: In order to memorize settings,
engine must be running.
_______________
33