Ski-Doo MX Zx 600 RS, Operator'S Manual

Page: 81 / 123

MAINTENANCE PROCEDURES
mmr2009-133-002_a
1. Deflection O-ring aligned with slider shoe
9. Read load recorded by the upper
O-ring on the tensiometer.
mmr2009-133-003_a
LOAD READING
1. Upper O-ring
10. Load reading must be as per the
following table.
TRACK ADJUSTMENT
SPECIFICATION
TRACK
DEFLECTION
SETTING
30 mm - 35 mm
(1-3/16 in - 1-3/8 in)
TRACK LOAD
READING
7.3 kg (16 lb)
11. If load reading is not in accordance
with the specification, adjust track
tension. Refer to
TRACK TEN-
SION ADJUSTMENT .
NOTICE
Too much tension will
result in power loss and excessive
stresses
on suspension compo-
nents.
Track Tension Adjustment
1. Remove the tether cord cap.
2. Remove rear wheel caps (if so
equipped).
mmr2008-048-007_a
1. RH rear idler wheel cap
3. Loosen the rear idler wheel retain-
ing bolts.
mmr2008-048-008_a
1. RH rear idler wheel bolt
4. Tighten or loosen both adjustment
screws to increase or decrease
track tension.
mmr2008-048-009_a
1. RH adjustment screw
5. If correct tension is unattainable,
contact an authorized Ski-Doo
dealer.
6. Retighten retaining bolts
to 48 N•m ± 6 N•m
(35 lbf•ft ± 4 lbf•ft).
_______________
79