Ski-Doo MX Zx 600 RS, Operator'S Manual

Page: 47 / 123

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2009-009-003_a
RECORD MODE
1. Recording time
2. Lap/session
3. Selected mode
To record another session, press the
SET (S) button until REC (record) mode
appears in display. Repeat same pro-
cedure previously described to record.
To Review Recorded Data:
Select PLAY mode.
mmo2008-007-005_a
PLAY MODE
1. Press the MODE (M) button to play
recorded data.
All recorded data (speedometer,
tachometer and the preselected mode
in display 1) will be displayed at the
same time.
2. Press the SET (S) button to stop
recorded lap OR press the MODE
(M) button to switch to another
recorded lap.
NOTE: Pressing the SET (S) button will
stop time of the lap in progress, then
the display will show the recorded time
length of that lap and will switch auto-
matically to the following recorded lap
after 5 seconds.
At the end of all recorded laps, STOP
will appear in display.
To review recorded data again, press
the SET (S) button to return to PLAY
mode. Repeat same procedure previ-
ously described to review.
To record other laps, press the SET (S)
button to switch to REC (record) mode.
Repeat same procedure previously de-
scribed to record.
Press and hold SET (S) button for 5 sec-
onds to exit the lap record mode, the
previously selected mode will be dis-
played.
R) Exhaust Gas Temperature
Displays real time exhaust gas temper-
ature and records the maximum read-
ing.
To display exhaust gas temperature,
proceed as follows:
1. Press the MODE (M) button to se-
lect display.
mmo2007-009-066_m
NOTE: Display will flash for approxi-
mately 5 seconds, then will return to
the previously selected mode if display
is not changed.
2. While display flashes, press the
SET (S) button to scroll and select
exhaust gas temperature (EGTM)
mode.
_______________
45