Ski-Doo MX Zx 600 RS, Operator'S Manual

Page: 30 / 123

IMPORTANT ON-PRODUCT LABELS
mmo2008-008-023
LABEL 10 – ON BRAKE DISC GUARD
• This shock absorber is pressurized.
• An explosion may occur if heated
or punctured.
• Do not disassemble.
WARNING
mmo2010-003-101_en
LABEL 11 – ON SHOCK GAS CHARGED
ABSORBERS
If you stud the track on this vehicle use special BRP approved studs ONLY.
Studding this track with conventional studs may cause studs to tear off of track and separate from vehicle posing a potential risk of severe injury or death
See the Operator's Guide that came with this vehicle for all details pertaining to track studding
WARNING
mmo2008-003-052_en
LABEL 12 – MODELS WITH TRACK APPROVED FOR STUDS
Compliance Labels
EPA Compliance Label
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
mmo2007-009-070
LABEL 13 – IN ENGINE COMPARTMENT
SSCC Label
Safety standards for snowmobiles
have been adopted by the Snowmo-
bile Safety and Certification Commit-
tee (SSCC) of which BRP is a proud
participating member. Assurance that
your snowmobile meets these stan-
dards is easily checked by locating the
Certification Label on a right vertical
portion of the vehicle.
The following label shows that an inde-
pendent testing laboratory has verified
compliance with the SSCC safety stan-
dards.
CE MODÈLE A ÉTÉ ÉVALUÉ
PAR UN LABORATOIRE
D'ESSAIS INDÉPENDANT
ET SATISFAIT TOUTES LES
NORMES DE SÉCURITÉ DU
SSCC EN VIGUEUR À LA
DATE DE FABRICATION.
PARRAINÉ PAR LE COMITÉ DE
SÉCURITÉ DE CERTIFICATION
D E L A M O T O N E I G E , I N C .
THIS MODEL HAS BEEN
EVALUATED BY AN INDE-
PENDENT TESTING LABOR-
ATORY AND IT MEETS ALL
SSCC SAFETY STANDARDS
IN EFFECT ON THE DATE OF
ITS MANUFACTURE.
SPONSORED BY THE SNOWMO-
BILE SAFETY AND CERTIFICA-
TION COMMITTEE, INC.
PRINTED
IN
U.S.A.
CERTIFIED
CERTIFIÉ
A00A1MA
LABEL 14 – ON TUNNEL
Technical Information Labels
mmo2007-009-051
LABEL 15
Not applying the recommended torque may result in a major failure of the drive
pulley and the engine. Refer to the shop manual for the complete assembly procedure.
Drive pulley bolt recommended torque
Couple de serrage recommandé pour le boulon de la poulie motrice
Ne pas appliquer le couple de serrage recommandé pourrait entraîner un bris majeur à
la poulie motrice et au moteur. Référer au manuel de réparation pour avoir la procédure
complète d'assemblage.
516003708
NOTICE
mmo2010-003-001
LABEL 16 – ON DRIVE BELT GUARD
28
_______
SAFETY INFORMATION
________