Ski-Doo MX Zx 600 RS, Operator'S Manual

Page: 83 / 123

MAINTENANCE PROCEDURES
5. Restart engine and rotate track
slowly to recheck alignment.
6. Reposition snowmobile on ground.
7. Install rear wheel caps if so
equipped.
Suspension
Rear Suspension Condition
Visually inspect all suspension compo-
nents including slider shoes, springs,
wheels, etc.
NOTE: During normal driving, snow
will act as a lubricant and coolant for
the slider shoes. Extensive riding on
ice or sanded snow, will create exces-
sive heat build-up and cause prema-
ture slider shoe wear.
Suspension Stopper Straps
Condition
Inspect stopper straps for wear
and cracks, bolt and nut for tight-
ness. If loose inspect holes for de-
formation.
Replace as required.
Torque nuts to 10 N•m ± 1 N•m
(89 lbf• in ± 9 lbf• in ).
Rear Arm Lubrication
Lubricate rear arm at grease fittings
using
suspension SUSPENSION
GREASE (P/N 293 550 033). Refer to
MAINTENANCE SCHEDULE
for main-
tenance frequency.
mmr2008-048-034_a
TYPICAL
1. Grease fittings
Steering and Front Suspension
Condition
Visually inspect steering and front sus-
pension for tightness of components
(steering arms, control arms and links,
tie rods, ball joints, ski bolts, ski legs,
etc.). If necessary, contact an autho-
rized Ski-Doo dealer.
Skis
Wear and Condition of Skis and
Runners
Check the condition of the skis and ski
runner carbides. If worn, contact an
authorized Ski-Doo dealer.
WARNING
Excessively worn skis and/or ski
runners will adversely affect snow-
mobile control.
Fuse
Fuse Inspection
The accessories circuits are protected
with a fuse.
Check fuse condition and replace it if
necessary.
To remove fuse from holder, pull fuse
out. Check if filament is melted.
1
2
A15E0KA
1. Fuse
2. Check if melted
NOTICE
Do not use a higher rated
fuse as this can cause severe dam-
age to electrical components and/or
be a potential fire.
_______________
81