Ski-Doo 2005 REV series, Operator'S Manual

Page: 239 / 283

Tighten lock nuts (some models only) and retaining screws.

WARNING
If lock nuts are not tightened properly, the adjusting screws
could loosen causing the track to become extremely loose and,
under some operating conditions, allow the idler wheels to
climb over the track lugs forcing the track against the tun-
nel causing the track to “lock”. Properly tighten wheel retain-
ing screws, otherwise wheel may come off and cause track to
“lock”.
1
2
A05F0EB
TYPICAL
1. Retighten (so equipped models)
2. Retighten to 48 N•m (35 lbf•ft)
Restart engine and rotate track slowly to recheck alignment.
Reposition snowmobile on ground.
Install rear wheel caps if so equipped.
Steering and Front Suspension
Visually inspect steering and front suspension for tightness of com-
ponents (steering arms, control arms and links, tie rods, ball joints,
ski bolts, ski legs, etc.). If necessary, contact an authorized SKI-DOO
dealer.
_________________________
237