Ski-Doo 2005 REV series, Operator'S Manual

Page: 237 / 283

Alignment

WARNING
Before checking track alignment, ensure that the track is free
of all particles which could be thrown out while track is rotat-
ing. Keep hands, tools, feet and clothing clear of track. Al-
ways lift the snowmobile on a wide-base stand with a rear de-
flector panel. Ensure no one is standing in close proximity to
the snowmobile, especially at the rear of the track. Never ro-
tate track at high speed.
Centrifugal force could cause debris, damaged or loose studs,
pieces of torn track, or an entire severed track to be violently
thrown backwards out of the tunnel with tremendous force,
possibly resulting in the loss of a leg or other serious injury.
Start the engine and accelerate slightly so that track barely turns.
This must be done in a short period of time (15 to 20 seconds).
Check that the track is well centered; equal distance on both sides
between edges of track guides and slider shoes.
A01F05A
1
2
3
1. Guides
2. Slider shoes
3. Equal distance
_________________________
235