Ski-Doo 2005 REV series, Operator'S Manual

Page: 232 / 283


WARNING
NEVER operate engine:
– without shields and belt guard securely installed
– with hood opened or removed.
NEVER attempt to make adjustments to moving parts while
engine is running.
Drive Belt Condition
Inspect belt for cracks, fraying or abnormal wear (uneven wear,
wear on one side, missing cogs, cracked fabric). If abnormal wear
is noted, probable cause could be pulley misalignment, excessive
RPM with frozen track, fast starts without warm-up period, burred
or rusty sheave, oil on belt or distorted spare belt. Contact an
authorized SKI-DOO dealer.
Check the drive belt width. Replace the drive belt if width is less
than the minimum width recommended in SPECIFICATIONS.
Brake Condition
The brake mechanism on your snowmobile is an essential safety de-
vice. Keep this mechanism in proper working condition. Above all,
do not operate the snowmobile without an effective brake system.
Periodically verify the condition/wear of the brake pads.
Brake Adjustment
No adjustment is provided for hydraulic brake. See an authorized
SKI-DOO dealer if any problems.
Rear Suspension Condition
Visually inspect all suspension components including slider shoes,
springs, wheels, etc.
NOTE: During normal driving, snow will act as a lubricant and coolant
for the slider shoes. Extensive riding on ice or sanded snow, will cre-
ate excessive heat build-up and cause premature slider shoe wear.
Suspension Stopper Strap Condition
Inspect stopper strap for wear and cracks, bolt and nut for tightness.
If loose inspect holes for deformation. Replace as required. Torque
nut to 11 N•m (97 lbf•
in
).
230
_________________________