Ski-Doo 2005 REV series, Operator'S Manual

Page: 139 / 283

NOTE: When the “2 + 1” seat is removed, you must always proceed
to the reinstallation of the passenger’s seat (the one with a backrest)
immediately behind the operator’s seat before riding. Failure to do
so leaves the snowmobile with a hole between the operator’s seat
and the passenger’s seat. This is incorrect and the snowmobile must
not be ridden in this configuration.

WARNING
– NEVER use the hole left by removing the “2 + 1” seat to sit a
passenger or put cargo. The passenger could hurt his back or
suffer other serious injuries due to his seating position. Cargo
placed in this hole would be unstable, could fall and potentially
injure someone.
– A passenger sitting on the passenger’s seat that is installed
in the “third” position must not use the hole left by the “2 + 1”
seat to put his feet as it could impair his stability. Feet must
remain on the footrests and hands must firmly grasp the grab
handles at all times.
CAUTION: Take care to store the 2 + 1 seat properly to avoid any
damages.
Reinstall passenger's seat on vehicle immediately behind the opera-
tor’s seat.
When passenger's seat rests in its position, firmly push seat down
to latch.
NOTE: A distinctive snap will be felt. Double check that the seat is
secure by giving it a tug to confirm proper latching.
_________________________
137