SKF ST-1240-GRAPH, Manual

Page: 9 / 43

9
1. SAFETY INSTRUCTIONS
Danger Read and follow the operating instructions and operation description of this product. Failure to
follow these instructions may result in a serious injury or damage to the lubrication system or the
lubricated equipment.
General safety instructions
"
Putting the products into operation or operating them without having read the instructions is prohibited. The operator must
ensure that the instructions are read and understood by all persons who work with the product or who supervise or instruct
such persons. Retain the instructions for further use.
"
The product may only be used in awareness of the potential dangers, in proper technical condition, and according to the
information in this manual.
"
Any faults that could affect safety must be remedied according to responsibility. The supervisor must be notified immediately
in the event of malfunctions outside one's individual scope of responsibility.
"
Unauthorised changes may have unexpected effects on the safety and performance of the product, which is why making such
changes is prohibited. Only original SKF spare parts and SKF accessories may be used.
"
Any unclear points regarding proper condition or correct assembly/operation must be clarified. Operation is prohibited until
issues have been clarified.
"
The components used must be suitable for the intended use and the applicable operating conditions, e.g. max. operating
pressure and ambient temperature range, and must not be subjected to torsion, shear, or bending.
Figure 1
.
ST-1240-GRAPH control centre and the location of the safety label.
Dangerous voltage