SKF ST-1240-GRAPH, Manual

Page: 15 / 43

15
Residual risks
Residual risk Prevention/remedy
Lifecycle stage: Installation / start-up / operation / setting and retrofitting
Electrical shock caused by a
faulty or incorrectly connected
power cable
" Check the supply cable before connecting power supply to the
device.
"
Connect all wires correctly.
Torn/broken wires, when
connected to moving devices
of the machines
" Use flexible cable lines with cable clamps, when there are
moving components in use.
Lifecycle stage: Failure, troubleshooting, maintenance, repair / removing from service and
disposal
Electrical shock from a faulty
power cable that has been
connected to electricity supply
" Check the condition of the power cable before starting up the
device.
Electrical shock from an open
and energised control centre
" Switch off power with the main switch before any work on
electrical components.
" Be always careful and cautious, when working on the product.
" Ensure that the protection against contact of the energised
parts is intact and in place.