Sinclair MS-E48AIN, Service Manual

Page: 25 / 100

1) ON/OFF
Press this button to turn on the unit. Press this button again to turn off the unit.
2)
－
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly decreases set
temperature. In AUTO mode, set temperature is not adjustable.
3)
＋
Press this button to increase set temperature. Holding it down above 2 seconds rapidly increases set
temperature. In AUTO mode, set temperature is not adjustable.
4) MODE
Each time you press this button, a mode is selected COOL, DRY, FAN, and HEAT *, as the following:
*Note: Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on
the LED of the indoor, and the unit will automatically select the suitable operation mode in accordance with the
room temperature to make indoor room comfortable.
5) FAN
This button is used for setting Fan Speed in the sequence that goes from AUTO, , , ,
, , then back to Auto.
Low speed Low-Medium speed Medium speed
Medium-High speed High speed
6) SWING
20
2