ES
7/8
MODIFICACIÓN DE LAS POSICIONES DE LOS FINALES DE CARRERA Y DEL SENTIDO DE ROTACIÓN (EN MODO USUARIO)
8
El reajuste de los finales de carrera se programa automáticamente cada 60 ciclos (durante 4 ciclos)
o despué de un corte de alimentación para los casos siguientes : Finales de carrera Alto : Montaje A
y C, finales de carrera Bajo : Montaje A y B.and B.
8.1- Modificación del final de carrera subida (solo montajes B y D):
1
> 2 s
4
3
2
5 s
1- Posicionar el motor en el punto de parada de subida regulado en §2.3 con la ayuda de la tecla “subida”.
2- Pulsar simultáneamente en las teclas
“subida” y “bajada”
durante
5 segundos
. El motor efectúa una rotación
de 0,5 segundo en un sentido y luego en el otro.
3- Afinar el ajuste por medio de las teclas “descenso” y “subida” para obtener la posición de fin de recorrido
deseada.
4- Pulsar
2 segundos
en la tecla
“stop”
. El motor efectúa una rotación de 0,5 segundo en un sentido y luego en
el otro, la nueva posición de fin de recorrido queda memorizada.
8.2- Modificación del final de carrera bajada (solo montajes C y D) :
1
4
> 2 s
3
2
5 s
1- Posicionar el motor en el punto de parada regulado de bajada en §2.3 con la ayuda de la tecla
“bajada”
.
2- Pulsar simultáneamente en las teclas
“subida” y “bajada”
durante
5 segundos
. El motor efectúa una rotación
de 0,5 segundo en un sentido y luego en el otro.
3- Afinar el ajuste por medio de las teclas “descenso” y “subida” para obtener la posición de fin de recorrido
deseada.
4- Pulsar
2 segundos
en la tecla
“stop”
. El motor efectúa una rotación de 0,5 segundo en un sentido y luego en
el otro, la nueva posición de fin de recorrido queda memorizada.
8.3- Modificación del sentido de rotación:
No posicionar el motor sobre los finales de carrera de subida o bajada.
1 - Presionar al mismo tiempo las teclas
Subida y Bajada
durante
5 segundos
. El motor efectuará una corta
rotación en un sentido y después en otro.
2 -
En un plazo de 2 segundos, presionar la tecla Stop
durante 2 segundos
. El motor efectuará una corta
rotación en un sentido y después en otro. De esta manera
se habrá modificado el sentido de rotación.
2
> 2 s
1
5 s
2 s