PL
7/8
ZMIANA USTAWIEŃ POŁOŻEŃ KRAŃCOWYCH I KIERUNKU OBROTÓW (W TRYBIE UŻYTKOWNIKA)
8
Ponowna regulacja położeń krańcowych jest wykonywana automatycznie po każdych 60 cyclach pracy
(podczas 4 cykli) lub po zaniku napięcia zasilającego dla następujących rodzajów instalacji: Górny
wyłącznik krańcowy : Montaż A i C, dolny wyłącznik krańcowy : Montaż A i B.
8.1- Zmiana górnego położenia krańcowego (tylko w przypadku montażu B i D):
1
> 2 s
4
3
2
5 s
1- Ustawić napęd w „górnej” pozycji wyłącznika krańcowego ustawionej wcześniej na etapie 2.3 za pomocą
przycisku „Góra”.
2- Naciskać jednocześnie na przyciski
„Góra” i „Dół” przez 5 sekund
. Napęd wykonuje obrót 0,5 sekundy w
jednym kierunku, a następnie w drugim.
3- Ustawić nowe położenie krańcowe za pomocą przycisków „Góra” i „Dół”.
4- Naciskać przez
2 sekundy
na przycisk
„Stop”
, aby zatwierdzić nowe ustawienie. Napęd wykona obrót
0,5 sekundy w jednym kierunku, a następnie w drugim. Nowe ustawienie „górnej” pozycji wyłącznika
krańcowego jest zapisane w pamięci.
8.2- Zmiana dolnego położenia krańcowego (tylko w przypadku montażu C i D):
1
4
> 2 s
3
2
5 s
1- Ustawić napęd w „dolnej” pozycji wyłącznika krańcowego ustawionej wcześniej na etapie 2.3 za pomocą
przycisku „
Dół
”.
2- Naciskać jednocześnie na przyciski
„Góra” i „Dół” przez 5 sekund
. Napęd wykonuje obrót 0,5 sekundy w
jednym kierunku, a następnie w drugim.
3- Ustawić nowe położenie krańcowe za pomocą przycisków „Góra” i „Dół”.
4- Naciskać przez
2 sekundy
na przycisk
„Stop”
, aby zatwierdzić nowe ustawienie. Napęd wykona obrót
0,5 sekundy w jednym kierunku, a następnie w drugim. Nowe ustawienie „dolnej” pozycji wyłącznika
krańcowego jest zapisane w pamięci.
8.3- Zmiana kierunku obrotów (w trybie użytkownika):
Nie przemieszczać pancerza do górnego lub dolnego położenia krańcowego.
1- Naciskać jednocześnie na przyciski
“Góra” i “Dół”
przez
5 sekund
. Napęd wykona krótki ruch obrotowy w jednym
kierunku, a następnie w kierunku przeciwnym.
2- W ciągu
2 sekund, naciskać na przycisk Stop przez
2 sekundy.
Napęd wykona krótki ruch obrotowy w jednym
kierunku a następnie w kierunku przeciwnym, kierunek
obrotów został zmieniony.
2
> 2 s
1
5 s
2 s