ES
3/8
2.2- Configuración del sentido de rotación:
Pulsar en la tecla “subida” del emisor:
a-
Si el eje gira en el sentido “subida”, pasar a la etapa 2.3.
b-
Si el eje gira en el sentido “descenso”, invertir el sentido de rotación pulsando en la tecla
“stop”
durante al
menos
3 segundos
. El motor confirma la modificación mediante una rotación de 0,5 segundo en un sentido y
luego en el otro. Pasar a la etapa 2.3.
2.3- Ajuste de los finales de carrera:
Los reglajes de finales de carrera del motor T3.5 EHz DC se efectua de
4 formas diferentes
en fución de los
parametros siguientes : Presencia o ausencia de topes en la lama terminal y sujeción flexible o rigida* entre el
eje de enrollamiento y el tejido.
A
* V.A.R
V.A.S
Easylink
OctoEasy
B
* V.A.R
V.A.S
Easylink
OctoEasy
C
D
1- Pulsar
simultáneamente
en las teclas
“bajada” y
“subida“
de un emisor Hz. El motor efectúa una rotación
de 0,5 segundo en un sentido y luego en el otro.
2- Pulsar
2 segundos
en la tecla
“stop”
. El motor efectúa
una rotación de 0,5 segundo en un sentido y luego en el
otro. La programación esta concluida. Pasar a la etapa 3.
B
1
2
3
2 s
4
1- Posicionar el motor en el punto de parada de subida deseado, con la ayuda de las teclas “subida” y “bajada”.
2- Presionar simultáneamente sobre las teclas
“stop” y “bajada”
para memorizar el punto de parada de subida.
El motor se pone automaticamente en rotación de bajada.
3- Presionar sobre la tecla “stop” para parar el motor.
4- Presionar
2 segundos
sobre la tecla
“stop”
para validar el reglaje, el motor se para y efectúa una rotación de
0,5 segundo en un sentido y después en el otro. La programación esta concluida. Pasar al punto §3.
a
>>
>> OK >> 2.3
b
>>
>>
3 s
>> OK >> 2.3
2 s
A
1
2