PL
6/8
DZIAŁANIE NAPĘDU T3.5 EHz DC
6
6.1
- Przy dobrze naładowanym akumulatorze, możliwe polecenia to: podnoszenie, stop i opuszczanie.
- Napęd zwalnia przy położeniu krańcowym GÓRA i DÓŁ.
- Napęd rozpocznie ruch z mniejszą prędkością po poleceniu „GÓRA” rozpoczynającym się z dolnego
położenia krańcowego.
- Możliwe jest również wydanie polecenia do pozycji pośredniej (patrz §7).
6.2
-
Funkcja detekcji oblodzenia:
blokada rolety przy podnoszeniu ze względu na oblodzenie powoduje
zatrzymanie napędu.
6.3
-
Funkcja detekcji przeszkód:
blokada rolety przy opuszczaniu ze względu na obecność przeszkody
powoduje zatrzymanie napędu, a następnie odwrócenie kierunku obrotów.
6.4
-
Funkcja zabezpieczenia baterii przed nadmiernym rozładowaniem:
przed wykonaniem każdego
podnoszenia lub opuszczania, napęd sprawdza napięcie baterii:
Jeżeli napięcie jest niższe, niż 12V: nie będzie już można wykonywać operacji programowania napędu (§2-> §9).
Jeżeli napięcie jest niższe, niż 11,5V: napęd zatrzyma się na początku każdego polecenia podnoszenia.
Opuszczanie jest możliwe wyłącznie po kilkukrotnym naciśnięciu przycisku “Dół.
Jeżeli napięcie jest niższe, niż 10 V: odbiornik nie przyjmuje żadnych poleceń.
i
W tych przypadkach użyj ładowarki akumulatora, aby szybko wykonać ładowanie baterii
akumulatorów. Działanie napędu powróci do normalnego stanu tylko wtedy, gdy napięcie baterii
akumulatorów przekroczy 12V.
OSTRZEŻENIE: Nigdy nie zostawiaj rozładowanej baterii akumulatorów (bateria akumulatorów
może zostać uszkodzona przez pozostawienie jej w stanie rozładowania przez dłuższy czas).
ZAPIS / STEROWANIE / KASOWANIE POZYCJI POŚREDNIEJ
7
Zapis:
- Ustawić napęd w wymaganym
miejscu.
- Naciskać przez
5 sekund
na przycisk „Stop“
. Napęd
wykonuje obrót przez 0,5
sekundy w jednym kierunku, a
następnie w drugim.
5 s
Sterowanie:
- Naciskać na przycisk
« Stop » przez
0,5 sekundy. Napęd
wykonuje ruch do
pozycji pośredniej.
0,5 s
Kasowanie pozycji pośredniej:
Krótko nacisnąć przycisk „Stop” aby napęd osiągnął pozycję pośrednią, która
ma zostać wykasowana. Naciskać przez 5 sekund na przycisk Stop, aby wykasować pozycję pośrednią.