EN
7/8
RE-ADJUSTMENT OF END LIMITS AND MODIFICATION OF THE ROTATION DIRECTION (IN USER MODE)
8
The re-adjustment of end limits is automatic every 60 cycles (during 4 cycles) or after a battery disconnection
for the following installation: UP end limit, mounting A and C, DOWN end limit, mounting A and B.
8.1- Re-adjustment of Up end limit (mounting B and D only):
1
> 2 s
4
3
2
5 s
1- Move the motor to the Up end limit previously adjusted in §2.3 with the
“UP”
button.
2- Press simultaneously for
5 seconds
the
“UP” and “DOWN”
buttons
. The motor will run for 0,5 second in one
direction and then in the other direction.
3- Adjust the new position with the “UP” and “DOWN” buttons.
4- Confirm the new position by
pressing 2 seconds
the
“STOP” button
. The motor will run for 0,5 second in one
direction and then in the other direction. The new end limit is memorized.
8.2- Re-adjustment of Down end limit (mounting C and D only):
1
4
> 2 s
3
2
5 s
1- Move the motor to the Down end limit previously adjusted in §2.3 with the
“DOWN”
button.
2- Press simultaneously for
5 seconds
the
“UP” and “DOWN” buttons
, The motor will run for 0,5 second in one
direction and then in the other direction.
3- Adjust the new position with the “UP” and “DOWN” buttons.
4- Confirm the new position by
pressing 2 seconds
the
“STOP” button
. The motor will run for 0,5 second in one
direction and then in the other direction. The new end limit is memorized.
8.3- Modification of the rotation direction :
Do not move the roller shutter to the up or down end limit position.
1 - Press the
“UP” and “DOWN”
buttons simultaneously for
5 seconds.
The motor runs briefly in one direction, then
in the other.
2 -
Within 2 seconds, press the “STOP” button for
2 seconds.
The motor briefly runs in one direction, then in
the other. The rotation direction has been changed.
2
> 2 s
1
5 s
2 s
