MultiXplo / MultiTox
Page 27 / 60
NOSP15759-Rev 10
4.3.9.
Syntel connection
In this network version, an electronic board is inserted in the detector body and is used for
electric connection. Connecting the ground terminal should be performed thanks to 3-wires
shielded cables.
The connection of power supply wires (4 on side A and 4 on side B).
•
Two red wires on V +: +24 V
•
Two white wires on V-: 0 V
Connection of the media wires (2 on side A and 2 on side B)
•
A red wire on one of the N
•
A white wire on the other N (no specific edge)
Figure 5: Connecting drawing of the network versions
For more detail, thanks to refer to the operating manual NOSP15251
Summary of Contents for DM-TT6-K
