Simrad SP60 - REV D, Installation Manual

Page: 69 / 218

Wheelhouse units
53
851-164574 / C
6.6 Sonar Interface Unit
The Sonar Interface Unit should be mounted vertically with the
cable inlet downwords on a side wall inside a console, cabinet or
desk. It must be mounted close to the Sonar Processor Unit,
Operating Panel and display unit.
Provide enough space for easy access to the cabling.
149 mm
Ø7 mm
253 m
m
(CD7026)
Figure 17
Mounting the
Sonar Interface
Unit.
Observe the following procedure. To ensure correct operation, tick
off every item when the action has been carried out.
1 Prepare the mounting location.
2 Attach the Sonar Interface Unit vertically with four
fastening screws on the attachment lugs. The diameter of the
four fastening holes are 7 mm.
Related topics
→
Maximum cable distances, page 47.